Description
| SPECIFCATIONS | FML-430×750 | FML-430×1000 | FML-430×1500 | FML-430×2000 | FML-500×1000 | FML-500×1500 |
|---|---|---|---|---|---|---|
| Swing over bed | 430mm | 500mm | ||||
| Swing over gap | 660mm | 730mm | ||||
| Centers Distance | 700mm | 1000mm | 1500mm | 1950mm | 1000mm | 1500mm |
| Bed Width | 300 mm | |||||
| Spindle Speed (50Hz) | 42~1500rpm (12 speeds) INVERTER VARIABLE SPEED (3 Steps) 21~1833 rpm [ OPTION ] | |||||
| Spindle bore | 58mm | |||||
| Spindle nose | D1-6 (A1-6 option) | |||||
| Cross slide travel | 220 mm | 250 mm | ||||
| Metric pitches cutting | 0.5~7mm/Pitch (22) | |||||
| Inch thread cutting | 4~56TPI (36) | |||||
| Taper of tailstock | MT4 | |||||
| Main drive motor | 5HP | 7.5HP | ||||
| Machine weight | 1400kgs | 1500kgs | 1700kgs | 1900kgs | 1700kgs | 1900kgs |
| End | ||||||
