| NOMINAL SIZE |
Swing over Bed |
610mm (24″) |
760mm (30″) |
| Swing over Cross Slide |
350mm (13-3/4″) |
500mm (19-3/4″) |
| Height of Center |
305mm (12″) |
380mm (15″) |
| Distance Between Centers |
2033mm |
3050mm |
4050mm |
2033mm |
3050mm |
4050mm |
| BED |
Width of Bedways |
485mm |
| Total Length of Bed |
3320mm |
4380mm |
5470mm |
3320mm |
4380mm |
5470mm |
| Swing over Gap |
820mm |
970mm |
| Length of Gap |
515mm |
| Width in front of face plate |
340mm |
| SPINDLE |
Spindle nose mounting |
D1-11 Camlock |
| Spindle bore |
105mm |
| Taper of spindle bore |
MT#5 |
| Number of spindle speeds |
18 steps |
| Range of spindle speeds |
10-1200 rpm |
| TOOL SLIDE |
Total travel of cross slide |
375mm |
| Total travel of top slide |
225mm |
| Max. size cutting tool |
28mm |
| TAILSTOCK |
Total travel of tailstock barrel |
195mm |
| Taper in tailstock barrel |
MT#5 |
| Diameter of barrel |
80mm |
| THREADS |
Lead screw diameter & pitch |
Dia.38mm Pitch 12mm 2 T.P.I |
| Inch threads |
1/4-80 TPI (60) |
| Metric threads |
0.2-112mm (60) |
| Diametral pitches |
1-240 D.P. (55) |
| Module pitches |
0.05-28 M.P. (55) |
| FEEDS |
Feed rod diameter |
38mm |
| Range of longitudinal feeds |
0.04~5 mm/rev. (40) |
| Range of cross feeds |
0.015~4 mm/rev. (40) |
| MOTOR |
Main spindle motor |
15HP |
| Coolant pump motor |
1/8HP |
| WEIGHT |
Machine net weight |
3500 kgs |
4000 kgs |
4500 kgs |
3800 kgs |
4300 kgs |
4800 kgs |
| End |
